Third Edition • Second Printing | Operator's Manual |
|
|
|
|
Fall Hazards
The guard rail system provides fall protection. If occupants of the platform are required to wear personal fall protection equipment (PFPE) due to job site or employer rules, PFPE equipment and its use shall be in accordance with the PFPE manufacturer’s instructions and applicable governmental requirements.
Do not sit, stand or climb on the platform guard rails. Maintain a firm footing on the platform floor at all times.
Do not climb down from the platform when raised.
Keep the platform floor clear of debris.
Attach the platform entry chain and close the entry gate before operating.
Do not operate the machine unless the guard rails are properly installed and the entry is secured for operation.
Collision Hazards
Be aware of limited sight distance and blind spots when driving or operating.
Be aware of extended platform position when moving the machine.
The machine must be on a level surface or secured before releasing the brakes.
SAFETY RULES
Operators must comply with employer, job site and governmental rules regarding use of personal protective quipment.
Check the work area for overhead obstructions or other possible hazards.
Be aware of crushing hazards when grasping the platform guard rail.
Observe and use
No stunt driving or horseplay while operating a machine.
Do not lower the platform unless the area below is clear of personnel and obstructions.
Limit travel speed according to the condition of the ground surface, congestion, slope, location of personnel, and any other factors which may cause collision.
Part No.1000032 | 5 |
