Patton electronic 4630 user manual Typical Ethernet straight-through cable diagram

SmartNode 4630 User Manual C • Cabling

Ethernet

Ethernet devices (10Base-T/100Base-T) are connected to the SmartNode over a cable with RJ-45 plugs. All Ethernet ports on the SN4630 are Auto-MDX use any straight or crossover cable to connect to hubs, switches, PCs or other devices.

The interconnecting cables shall be acceptable for external use

and shall be rated for the proper application with respect to volt-

age, current, anticipated temperature, flammability, and

CAUTION mechanical serviceability.

When this device is used in North America, it shall be connected to a Network Termination Device and not connected directly to an outside POTS line.

CAUTION

	Hub
	Straight-through cable
RJ-45, male	RJ-45, male
1	1
2	2
3	3
6	6
	Note: Other pins are not used.

Figure 10. Typical Ethernet straight-through cable diagram

Ethernet 45