![](/images/new-backgrounds/1173330/17333087x1.webp)
SmartNode 4630 User Manual | C • Cabling |
|
|
Introduction
This section provides information on the cables used to connect the SmartNode and the interface cards to the existing network infrastructure and to third party products.
Console
The SmartNode can be connected to a serial terminal over its serial console port, as depicted in figure 9.
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
CAUTION mechanical serviceability.
When this device is used in North America, it shall be connected to a Network Termination Device and not connected directly to an outside POTS line.
CAUTION
Serial Terminal
Note A Patton Model
Figure 9. Connecting a serial terminal
Note See section “Console port” on page 48 for console port
Introduction | 44 |