Multi-Tech Systems MVP210-SS manual 171, Messages

MultiVOIP User Guide Technical Configuration

“Logs” Screen Definitions

Field Name	Values	Description
Enable	Y/N	Allows MultiVOIP debugging messages to be
Console		read via a basic terminal program like
Messages		HyperTerminal ™ or equivalent. Normally,
		this should be disabled because it uses
		MultiVOIP processing resources. Console
		messages are meant for tech support
		personnel.
Filters (button)		Click to access secondary screen on where
		console messages can be included/excluded
		by category and on a per-channel basis. (See
		the Console Messages Filter Settings screen on
		subsequent page.)
Turn Off Logs	Y/N	Check to disable log-reporting function.
Logs Buttons		Only one of these two log reporting methods,
		GUI, or SMTP, may be chosen.
GUI	Y/N	User must view logs at the MultiVOIP
		configuration program.
SNMP	Y/N	Log messages will be delivered to the
		MultiVoipManager application program.
SMTP	Y/N	Log messages will be sent to user-specified
		email address.
SysLog Server	Y/N	This box must be checked if logging is to be
Enable		done in conjunction with a SysLog Server
		program. For more on SysLog Server, see
		Operation & Maintenance chapter.
IP Address	n.n.n.n	IP address of computer, connected to voip
	for n=	network, on which SysLog Server program is
	0-255	running.
Port	514	Logical port for SysLog Server. 514 is
		commonly used.
Online Statistics	integer	Set the interval (in seconds) at which
Updation		logging information will be updated.
Interval

171