Multi-Tech Systems MVP210-SS manual 141, Disconnect Supervision fields

MultiVOIP User Guide			Technical Configuration
	FXO Supervision Parameter Definitions
	Field Name	Values	Description
	Disconnect Supervision fields		There are four possible criteria
			for disconnection under FXO:
			current reversal, current loss,
			tone detection, and silence
			detection. Disconnection can be
			triggered by more than one of
			the three criteria.
	Current	Y/N	Disconnection to be triggered
	Reversal		by reversal of current from the
			PBX.
	Current Loss	Y/N	Disconnection to be triggered
			by loss of current. That is,
			when Current Loss is enabled
			(“Y”), the MultiVOIP will hang
			up the call at a specified
			interval after it detects a loss of
			current initiated by the attached
			device.
	Current Loss	200 to 2000	Determines the interval after
	Timer	(in milliseconds)	detection of current loss at which
			the call will be disconnected.
	Silence	Y/N	Enables/disables silence-
	Detection		detection method of
	Enable		supervising call disconnection.
	Silence	One-Way or	Disconnection to be triggered
	Detection Type	Two-Way	by silence in one direction only
			or in both directions
			simultaneously.
	Silence Timer	integer value	Duration of silence required to
	in seconds		trigger disconnection.

141