Multi-Tech Systems MVP210-SS manual 166, Matched

Technical Configuration				MultiVOIP User Guide
		“Custom Fields” Definitions (cont’d)
	Field	Description	Field	Description
	Bytes	Total bytes sent in	Bytes	Total bytes received
	Sent	call.	Received	in call.
	Packets	Packets lost in	Coder	Voice Coder
	Lost	call.		/Compression Rate
				used for call will be
				listed in log.
	Outbound	The DTMF dialing	Prefix	When selected, the
	Digits	digits received by	Matched	phonebook prefix
	Received
		this gateway from		matched in
		the remote		processing the call
		gateway		will be listed in log.
		presuming that
		DTMF is set to
		"Out of Band."
	Call	Successful or	Call Type	Indicates the Call
	Status	unsuccessful.		Signaling protocol
				used for the call
				(H.323, SIP, or SPP).
	Call	Indicates call’s	DTMF	Indicates whether the
	Direction	originating party.	Capability	DTMF dialing digits
				are carried "Inband"
				or "Out of Band." The
				corresponding field
				values differ for the 3
				different voip
				protocols.
				For H.323, this field
				can display "Out of
				Band" or "Inband".
				For SIP it can display
				either "Out of Band
				RFC2833" or "Out of
				Band SIP INFO" to
				indicate the out-of-
				band condition or
				"Inband" to indicate
				the in-band condition.
				For SPP it can
				display "Out of Band
				RFC2833" or
				"Inband".

166