Operation & Maintenance

MultiVOIP User Guide

 

 

Setting a Password (Windows GUI)

After a user name has been designated and a password has been set, that password is required to gain access to any functionality of the MultiVOIP software. Only one user name and password can be assigned to a voip unit. The user name will be required when communicating with the MultiVOIP via the web browser GUI.

NOTE: Record your user name and password in a safe place. If the password is lost, forgotten, or unretrievable, the user must contact MultiTech Tech Support in order to resume use of the MultiVOIP unit.

1.The MultiVoip configuration program must be off when invoking the Set Password command. If it is on, the command will not work.

2.To invoke the Set Password command, go to Start Programs MVP____ x.xx Set Password.

3.You will be prompted to confirm that you want to establish a password, which will entail rebooting the MultiVOIP (which is done automatically).

Click OK to proceed with establishing a password.

344

Page 344
Image 344
Multi-Tech Systems MVP210-SS manual Setting a Password Windows GUI, 344