Technical Configuration | MultiVOIP User Guide |
|
|
The Custom
Custom
Field Name | Values | Description |
|
|
|
Tone Pair | dial tone, | Identifies the type of telephony |
| busy tone, | signaling tone for which |
| ring tone, | frequencies are being specified. |
| ‘unobtainable’ |
|
| tone, |
|
| survivability |
|
| tone, |
|
|
| |
TONE PAIR | VALUES | About Defaults: US telephony |
|
| values are used as defaults on |
|
| this screen. However, since this |
|
| dialog box is provided to allow |
|
| custom |
|
| default values are essentially |
|
| irrelevant. |
Frequency 1 | frequency in | Frequency of lower tone of pair. |
| Hertz | This outbound tone pair enters |
|
| the MultiVOIP at the input port. |
|
|
|
Frequency 2 | frequency in | Frequency of higher tone of pair. |
| Hertz | This outbound tone pair enters |
|
| the MultiVOIP at the input port. |
|
|
|
Gain 1 | gain in dB | Amplification factor of lower |
| +3dB to | frequency of pair. This figure |
| and “mute” | describes amplification that the |
| setting | MultiVOIP applies to outbound |
| tones entering the MultiVOIP at | |
|
| |
|
| the input port. Default = |
Gain 2 | gain in dB | Amplification factor of higher |
| +3dB to | frequency of pair. This figure |
| and “mute” | describes amplification that the |
| setting | MultiVOIP applies to outbound |
|
| tones entering the MultiVOIP at |
|
| the input port. Default = |
|
|
|
