Multi-Tech Systems MVP210-SS manual Fax Volume, 117

MultiVOIP User Guide			Technical Configuration
	Voice/Fax Parameter Definitions (cont’d)
	Field Name	Valuee	Description
	FAX Parameters
	(cont’d)
	Fax Volume	-18.5 dB	Controls output level of fax tones. To
	(Default =	to –3.5 dB	be changed only under the direction of
	-9.5 dB )		Multi-Tech’s Technical Support.
	Jitter Value	Default =	Defines the inter-arrival packet
	(Fax)	400 ms	deviation (in milliseconds) for the fax
			transmission. A higher value will
			increase the delay, allowing a higher
			percentage of packets to be
			reassembled. A lower value will
			decrease the delay allowing fewer
			packets to be reassembled.
	Mode (Fax)	FRF 11;	FRF11 is frame-relay FAX standard using
		T.38	these coders: G.711, G.728, G.729, G.723.1.
		(T.38 not	T.38 is an ITU-T standard for storing
		currently	and forwarding FAXes via email using
		sup-	X.25 packets. It uses T.30 fax standards
		ported)	and includes special provisions to
			preclude FAX timeouts during IP
			transmissions.

117