Multi-Tech Systems MVP210-SS manual Pstn pstn call connected on

MultiVOIP User Guide QS: Connectivity Test

Console Messages from Terminating VOIP. The voip unit connected to the phone where the call is answered will send back messages like that shown below.

[00170860]	H323[0]: New incoming call
[00170860]	PSTNIF : Placing call on channel 0 Outbound
	digit 7175662
[00170885]	CAS[0] : TX : ABCD = 1, 1, 1, 1
[00171095]	H323IF [0]: MasterSlaveStatus=Master
[00171105]	CAS[0] : RX : ABCD = 1, 1, 1, 1,Pstn State[7]
	TimeStamp : 171105
[00171105]	H323IF[0]: Coder used 'g7231'
[00171110]	H323IF[0]:FastStart Setup Not Used
[00171110]	H323IF[0]: Already opened the outgoing logical
	channel
[00171110]	H323IF[0]: Coder used 'g7231'
[00171315]	CAS[0] : RX : ABCD = 0, 0, 0, 0,Pstn State[9]
	TimeStamp : 171315
[00172275]	PSTN: dialing digit ended on 0
[00172285]	PSTN: pstn proceeding indication on 0
[00172995]	CAS[0] : RX : ABCD = 1, 1, 1, 1,Pstn State[12]
	TimeStamp : 172995
[00173660]	CAS[0] : TX : ABCD = 1, 1, 1, 1
[00173760]	PSTN:pstn call connected on 0

9.When you see the following message, end-to-end voip connectivity has been achieved.

“PSTN: pstn call connected on X”

where x is the number of the voip channel carrying the call

10.If the HyperTerminal messages do not confirm connectivity, go to the Troubleshooting procedure below.

59