Multi-Tech Systems MVP210-SS manual Telephony Interface Parameters

MultiVOIP User Guide Technical Configuration

Write down the values for these IP parameters. You will need to enter these values in the “IP Parameters” screen in the Configuration section of the MultiVOIP software. You must have this IP information about every VOIP in the system.

Telephony Interface Parameters

The following parameters must be known about the PBX or telco central office equipment to which the analog MultiVOIP will connect:

Phone Parameters

Ask phone company or telecom manager.

#Telephony Interface Parameters:

Record for this VOIP Site

•Which interface type is to be used?

E&M_____ FXS/FXO_____ DIP/DPO _____

•If FXS, determine whether the line will be used for a phone, fax, or KTS (key telephone system)

•If FXO, determine if line will be an analog PBX extension or an analog line from a telco central office

•If E&M, determine these aspects of the E&M trunk line from the PBX:

•What is its Type (1, 2, 3, 4, or 5)?

•Is it 2-wire or 4-wire?

•Is it Dial Tone or Wink?

93