Multi-Tech Systems MVP210-SS manual 325

MultiVOIP User Guide Operation & Maintenance

MultiVOIP Program Menu (cont’d)

Menu Selection	Description
Download Factory Defaults	Select this to return the configuration
	parameters to the original factory
	values.
Download Firmware	Select this to download new versions
	of firmware as enhancements become
	available.
Download IFM Firmware	Select this to download new versions of
	IFM firmware as enhancements become
	available. The Interface Module (IFM) is
	the telephony interface for analog
	MultiVOIP units (MVP130, MVP130FXS,
	MVP210, MVP410, MVP810). There is one
	IFM for each channel of the MultiVOIP
	unit. For each channel, the IFM handles
	the analog signals to and from the attached
	telephone, PBX or CO line.
Download User Defaults	To be used after a full set of parameter
	values, values specified by the user,
	have been saved (using Save Setup).
	This command loads the saved user
	defaults into the MultiVOIP.
Set Password	Select this to create a password for
	access to the MultiVOIP software
	programs (Program group commands,
	Windows GUI, web browser GUI, &
	FTP server). Only the FTP Server
	function requires a password for access.
	The FTP Server function also requires
	that a username be established along
	with the password.
Uninstall	Select this to uninstall the MultiVOIP
	software (most, but not all components
	are removed from computer when this
	command is invoked).
Upgrade Software	Loads firmware (including H.323
	stack) and settings from the controller
	PC to the MultiVOIP unit. User can
	choose whether to load Factory
	Default Settings or Current
	Configuration settings.

325