MultiVOIP User Guide | QS: Startup Tasks |
|
|
MultiVOIP Startup Tasks
Task | Summary |
|
|
Collecting Phone/IP | The MultiVOIP must be configured to |
Details ( vital! ) | interface with your particular phone |
| system and IP network. To do so, |
| certain details must be known about |
| those phone and IP systems. |
Placement | Decide where you’ll mount the voip. |
Command/Control | Some modest minimum specifications |
Computer Setup: | must be met. A COM port must be set |
Specs & Settings | up. |
Hookup | Connect power, phone, and data cables |
| per diagram. |
Software Installation | This is the configuration program. |
| It’s a standard Windows software |
| installation. |
|
|
Phone/IP Starter Configuration
Phonebook Starter Configuration
You will enter phone numbers and IP addresses. You’ll use default parameter values where possible to get the system running quickly.
Use “Config Info CheckList” (page 28).
The phonebook is where you specify how calls will be routed. To get the system running quickly, you’ll make phonebooks for just two voip sites.
Connectivity Test
Troubleshooting
You’ll find out if your voip system can carry phone calls between two sites. That means you’re up and running!
Detect and remedy any problems that might have prevented connectivity.
24
