![](/images/new-backgrounds/1251770/25177053x1.webp)
Getting started | 04 |
•My AV receiver is definitely compatible with 96 kHz/88.2 kHz Linear PCM audio, but it doesn’t seem to work with this player. What’s wrong?
For digital
To fully take advantage of the high sampling rate audio, connect the analog audio outputs to your amplifier/receiver.
•Why can’t I hear SACD audio through the digital outputs?
SACD audio is only available through the analog outputs. This is not a malfunction. Some
•Is it better to listen to
Some
Using the multichannel analog audio outputs for
•My
The disc may have been illegally copied.
•I’ve connected to a HDMI compatible component but I can’t get any signal and the front panel HDMI indicator won’t light!
Make sure that you’ve selected this player as the HDMI input in the settings for the component you’re using. You may need to refer to the instruction manual of the component to do this. See Connecting using HDMI on page 16 for more on HDMI compatibility.
•Why can't I hear SACD audio through the optical/coaxial digital outputs or the HDMI interface?
SACD audio is only available through the analog outputs. This is not a malfunction. Also, some
•There’s no picture from the HDMI output!
This player cannot display pictures from DVI compatible sources. See Connecting using HDMI on page 16 for more on HDMI compatibility.
Make sure the resolution on this player matches that of the component you have connected using HDMI. See HDMI Resolution on page 41 to change the HDMI resolution.
27
En