
Chapter 5 | CLI – Layer 2 |
|
|
VLANs allowed Range of VLAN values allowed on the port. on trunk
Show vlan Command
Use the show vlan command to display the VLANs configured in the stack/ module.
The syntax for this command is:
show vlan
Example: |
|
show vlan | |
VLAN ID | |
1 | v1 |
5 | V5 |
10 | V10 |
15 | V15 |
20V20
25V25
Show spantree Command
Use the show spantree command to display
The syntax for this command is:
show spantree [<mod_num>[/<port_num>]]
Example:
P330-N> show spantree
Spanning tree enabled
Designated Root: | |||
Designated Root Priority: 32768 | |||
Designated | Root | Cost: 20 | |
Designated | Root | Port: 1/1 | |
Root Max Age: 20 | Hello Time: 2 |
Bridge ID MAC ADDR:
62 |