Avaya P332G-ML manual No router srrp, Router-SRRP Mode, No poll-interval poll interval

Chapter 6 CLI – Layer 3

Configure Mode

router srrp Command

Use the router srrp command to configure SRRP options, activate SRRP and enter the SRRP configuration mode. The no form of this command disables it globally. The default is disabled.

Note: You cannot activate both VRRP and SRRP protocols at the same time.

The syntax for this command is:

[no] router srrp

Router-SRRP Mode

poll-interval Command

Use the poll-intervalcommand to configure the polling interval in seconds used by SRRP. Use the no form of this command to return to the default polling interval of 1 second.

The syntax for this command is:

[no] poll-interval <poll interval>

poll interval An integer (in seconds)

Example:

Router-N(configure router:srrp)# poll-interval 4

timeout Command

Use the timeout command to configure the timeout (in seconds) after which SRRP declares the main router dead if it does not reply to polling.

Use the no form of this command to return to default timeout interval of 12 seconds.

The syntax for this command is:

[no] timeout <timeout>

timeout An integer (in seconds)

178 P332G-ML User’s Guide