Avaya P332G-ML manual Rmon alarm Command

Chapter 5 CLI – Layer 2

interval	The interval between 2 samples.
number of	The number of buckets defined
buckets
owner name	Owner name string

Example:

P330-N# rmon history 1026 1026 3/2 30 buckets 20 owner amir

history 1026 was created successfully

Note: If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, e.g. "new york".

Rmon alarm Command

Use the rmon alarm command to create a new RMON alarm entry.

The syntax for this command is:

rmon alarm <Alarm Number> <variable> <interval> <sampletype> rising-threshold<rising threshold> <rising event> falling- threshold <falling threshold> <falling event> <startup alarm>

<owner>
alarm number	This is the alarm index number of this entry (it is advisable to
	use the same interface number as your alarm index number.)
variable	This is the MIB variable which will be sampled by the alarm
	entry.
interval	The interval between 2 samples
sample type	This can be set to either delta (the difference between 2
	samples) or an absolute value.
rising threshold	This sets the upper threshold for the alarm entry.
rising event	The RMON event entry that will be notified if the upper
	threshold is passed.
falling	This sets the lower threshold for the alarm entry.
threshold

116 P332G-ML User’s Guide