Avaya P332G-ML manual Lag

				Chapter 2 Avaya P332G-ML Front and Rear Panels
Table 2.1	Avaya P332G-ML LED Descriptions (Continued)
LED Name		Description			LED Status
					OFF – No flow control.
					ON – One of the three possible flow control
FC		Flow Control			modes is enabled.
					Note: FC LED reflects the last negotiated
					mode when auto-negotiation is enabled and
					the link is down.
Hspd		High Speed			Always ON – 1000 Mpbs mode only
LAG		Link Aggregation			OFF – No LAG defined for this port
		Group (Trunking)			ON – Port belongs to a LAG
Table 2.2	Avaya P332G-ML <- -> Select buttons
Description			Function
Left/Right			Individual – select LED function (see table above)
Reset module			Press both right and left buttons together for approximately 2
			seconds. All LEDs on module light up until buttons are
			released.
Reset stack			Press both Right and Left buttons together for 4 seconds. All
			LEDs on stack light up until buttons are released.

P332G-ML User’s Guide 21