Avaya P332G-ML manual Dir Command, Dir modnum, P330-N dir

Chapter 5 CLI – Layer 2

Example:

P330-N> show arp-aging-interval

ARP aging interval was set to 10 minutes.

Dir Command

The dir command is used to show the file types that have been downloaded to the module.

The syntax for this command is:

dir [<mod_num>]

Example:

P330-N> dir

M#	file	ver num	file type	file location	file description
--	----	--------	----------	-------------	----------------
1	Booter_Image	3.5.17	SW BootImage	Nv-Ram	Booter Image
1	module-config	N/A	Running Conf	Ram	Module Configuration
1	stack-config	N/A	Running Conf	Ram	Stack Configuration
1	EW_Archive	N/A	SW Web Image	Nv-Ram	Web Download
2	Booter_Image	3.2.5	SW BootImage	Nv-Ram	Booter Image
2	module-config	N/A	Running Conf	Ram	Module Configuration
2	EW_Archive	N/A	SW Web Image	Nv-Ram	Web Download
Output Fields:
Field		Description
M#		The module number
file		There are several files loaded into modules memory:

•module-config – file which contains the configuration settings made to this module.

•stack-config – file which contains the configuration settings made at the stack level (for example IP address of the stack)

•EW_Archive – file which contains the Device Manager (Embedded Web) software.

ver num	S/W Version number – relevant only for the Device
	Management S/W

74 P332G-ML User’s Guide