Avaya P332G-ML manual No ip ospf cost cost, No ip ospf hello-interval seconds

Chapter 6 CLI – Layer 3

Interface Mode

ip ospf cost Command

Use the ip ospf cost command to configure interface metric. The no form of this command sets the cost to its default. The default is 1.

The syntax for this command is:

[no] ip ospf cost <cost>

costinteger

Example:

ip ospf cost 10

ip ospf hello-interval Command

Use the ip ospf hello-intervalcommand to specify the time interval between hello's the router sends. The no form of this command sets the hello- interval to its default. The default is 10.

The syntax for this command is:

[no] ip ospf hello-interval <seconds>

secondsinteger

Example:

ip ospf hello-interval 5

ip ospf dead-interval Command

Use the ip ospf dead-intervalcommand to configure the interval before declaring the neighbor as dead. The no form of this command sets the dead- interval to its default. The default is 40.

The syntax for this command is:

[no] ip ospf dead-interval <seconds>

secondsinteger

Example:

ip ospf dead-interval 15

168 P332G-ML User’s Guide