Avaya P332G-ML manual Show module Command, Show module modnum, Output Fields

Chapter 5 CLI – Layer 2

Show module Command

Use the show module command to display module status and information. For each module with an expansion sub-module installed, both module and sub- module type and information are shown.

The syntax for this command is:

show module [<mod_num>]

mod_num		(Optional) Number of the module. If you do not specify a
		number, all modules are shown.
Mod	Type	C/S	S/N	Statuses
---	------------------ ----		--------	----------------------------
1	P332GT-ML	0.0	1234567	PS:Ok Fans:Fail Mode:Layer2
	P330MLSTK	1.0		Conn-Up:Ok Conn-Down:Fail
	BUPS			BUPS:Not Prsnt Fans:None Type:None
2	P333T	1.0	4144162	PS:OK Fans:OK Mode:Layer2
	X330GT2	2.0
	P330STK	2.0		Conn-Up:Fail Conn-Down:Ok
	BUPS			BUPS:Not Prsnt Fans:None Type:None
Output Fields
Field		Description
Mod		Module number
Type		Module Type/Expansion sub-module type
S/N		Serial number of the module
C/S		(Hardware) Configuration Symbol of the module/
		Expansion sub-module
Statuses		Status of the module/submodule

Show port flowcontrol Command

Use the show port flowcontrol command to display per-port status information related to flow control.

The syntax for this command is:

show port flowcontrol [<mod_num>[/<port_num>]]

58 P332G-ML User’s Guide