Avaya P332G-ML P330-N# copy tftp stack-config c\p332ml\switch1.cfg, Copy tftp EWarchive Command

Chapter 5 CLI – Layer 2

Example:

P330-N# copy tftp stack-config c:\p332ml\switch1.cfg 192.168.49.10

Copy tftp module-config Command

Use the copy tftp module-configcommand to download the module-level configuration from a saved file into the current NVRAM running configuration of a module, via TFTP. To use this command, you need to have an active tftp server, and to create a file into which to download the data. If Avaya Multi-Service Network Manager is running, an additional tftp server is not required.

Note: You should perform the nvram initialize command prior to the copy tftp operation.

The syntax for this command is:

copy tftp module-config<filename> <ip> <mod_num>

filename	File name (full path)
ip	The ip address of the TFTP server

Example:

P330-N# copy tftp startup-config c:\p332ml\switch1.cfg 192.168.49.10 5

Copy tftp EW_archive Command

Use the copy tftp EW_archive command to download the P330 Device Manager application into the module via TFTP. To use this command, you need to have an active tftp server, and to create a file into which to download the data. If Avaya Multi-Service Network Manager is running, an additional tftp server is not required.

The syntax for this command is:

copy tftp EW_archive <filename> <ip> <mod_num>

filename	Embedded Web Manager image file name (full path)
ip	The ip address of the TFTP server
mod_num	Target module number

120 P332G-ML User’s Guide