Chapter 5 | CLI – Layer 2 |
|
|
Set system location Command
Use the set system location command to set the mib2 system location MIB variable.
The syntax for this command is:
set system location [<string>]
string | Location name. The location name is cleared if this field is left |
| blank. A string of 2 words or more must be type in quotation |
| marks – e.g. “Operations Floor”. |
Set system name Command
Use the set system name command to set mib2 system name MIB variable.
The syntax for this command is:
set system name [<string>]
string | System name. The system name is cleared if this field is left blank. A |
| string of 2 words or more must be type in quotation marks – |
| e.g. “Backbone Stack”. |
Set system contact Command
Use the set system contact command to set mib2 system contact MIB variable.
The syntax for this command is:
set system contact [<string>]
string | Contact person. The contact person field is cleared if this field is |
| blank. A string of 2 words or more must be type in quotation |
| marks – e.g. “Yigdal Naouri”. |
90 |
