Avaya P332G-ML Set logout Command, Set logout timeout, P330-N#set logout, Set timezone Command

Chapter 5	CLI – Layer 2
• set intelligent-multicast Sets the aging time for router ports	Page 111
router-port-pruning
time

•set intelligent-multicast group-filtering-delay time

•set security mode

Sets the time delay before a filter is	Page 112
applied to a specific group
Enables or disables the stack’s MAC	Page 112
security

•	set arp-aging-interval	Sets the arp aging interval	Page 112
•	set arp-tx-interval	Sets the keep-alive interval	Page 113
•	set welcome message	Sets a welcome message to appear after	Page 113
		a reboot.

Set logout Command

The set logout command is used to set the number of minutes until the system automatically disconnects an idle session.

The syntax for this command is:

set logout <timeout>

timeout	Number of minutes (0 to 999) until the system automatically
	disconnects an idle session. Setting the value to 0 disables the
	automatic disconnection of idle sessions (default is 15 minutes).

Example:

To set the number of minutes until the system disconnects an idle session automatically:

P330-N# set logout 20

Sessions will be automatically logged out after 20 minutes of idle time.

To disable the automatic disconnection of idle sessions:

P330-N#set logout 0

Sessions will not be automatically logged out.

Set timezone Command

Use the set timezone command to assign a timezone name and set the time difference of your P330 relative to the Coordinated Universal Time (UTC/GMT).

P332G-ML User’s Guide 85