6. MENU FUNCTIONS
6.3 Commands (1)
This option in the main menu allows you to access the following functions on Automower®.
•Charge then AUTO (1-1)
in order for Automower® to drive immediately to the charging station, charge the battery and then return to the automatic operating mode. Select the function and press YES when the cursor is on Yes.
•Show latest faults (1-2)
to show the list of saved fault messages. Browse with the arrow buttons. The list can contain up to 20 fault messages and each message is shown with the date and time.
•Make factory settings (1-3)
to restore all settings to their original values. All except the selected language and PIN code are reset. Select the function, enter your PIN code and press YES when the cursor is on Yes.
6.4 Timer (2)
The lawn should not be cut too often to obtain the best mowing result. Consequently, it is important to limit the operating time using the timer function if the working area is less than the mower's working capacity. When Automower® is allowed to mow too much, the lawn may appear flattened. Besides, the mower is subjected to unnecessary wear.
The timer function is also an ideal means to control during which periods Automower® should not mow, for example, when the children are playing in the garden.
When you set the timer, assume that Automower® 260 ACX mows about 250 m2 per hour.
Commands
Timer
Installation
Settings
1
Charge then AUTO
Show latest faults
Make factory sett. 1-
•Timer override (2-1)
to temporarily disconnect the timer function.
•Day timer (2-2)
to set the start and stop times.
•Week timer (2-3)
to select which days of the week Automower® should mow.
Commands
Timer
Installation
Settings
2
Timer override
Day timer
Week timer
2-
English - 49
