Projector WUX10 MarkII User Commands
CONT
Contrast setting
Format
CONT=<Contrast setting:Number>
GET□CONT / ?△CONT
Setting values for <Contrast setting:Number> are
Environment
| Power |
|
|
|
| Input | |||
OFF | ON | PM | COMP | VIDEO | HDMI | None | |||
X | O | X | - |
|
|
|
Response
"i:OK" is returned if the parameter was set properly.
For 'GET CONT' or '?CONT', current contrast setting is returned as
'g:CONT=<Contrast setting:Number>'
For details on other responses, refer to the "Error List".
Description
(1)This sets the screen contrast.
(2)This command functions in the same way as when "Image adjustment" - "Contrast setting" are selected on the menu.
(3)If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4)This sets the currently selected input signal and image mode.
(5)The current contrast can be acquired using the applicable GET command. ("GET CONT")
Example
Setting | This sets the contrast to +3. | |
> CONT=3 | ||
< | i:OK |
|
Reference | This retrieves the contrast. | |
> | GET CONT or ?CONT |
<g:CONT=3
*Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
Changes
Revised by
Approved by
- 26 -