Canon Autopc, Projector WUX10 MarkII User Commands, Format, Environment, Response, Description

Projector WUX10 MarkII User Commands

AUTOPC

Auto PC

Format

AUTOPC

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	X	O	O	X	X	X	X

Response

"i:OK" is returned if the control was executed properly. For details on other responses, refer to the "Error List".

Description

(1)This executes Auto PC.

(2)This command is identical to pressing the “AUTOPC” button on the remote control.

(3)If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned as an error response.

(4)If signals are not input, "e:2010 NO_SIGNAL" is returned.

(5)Execution of this command may modify the following setting values.

・Total number of dots ・Tracking

・Horizontal/vertical positions

・Number of horizontal/vertical display dots

(6)To confirm modified setting values, use the GET command of the respective parameter. For details, refer to the GET commands below.

Setting	GET
Total number of dots	GET DOTS
Tracking	GET TRACK
Horizontal position	GET HPOS
Vertical position	GET VPOS
Number of horizontal display dots	GET HPIX
Number of vertical display dots	GET VPIX

Example

>AUTOPC < i:OK

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 18 -