Projector WUX10 MarkII User Commands
Commands
Request transmissions sent from PC to the projector.
Transmission format
△<Command character strings> △<Delimiters>
<Command character strings>
Character strings consisting of 0 or more alphanumeric characters. <Delimiters>
One of CR (0Dh), LF (0Ah), CR+LF (0Dh+0Ah), Null (00h)
Type
Type | Description | Response |
|
|
|
| Commands with a command character string length of 0. No | ■ | OK | |
| command processing is performed. | |||
|
|
| ||
Null Commands | <Null command character string> | □ BUSY | ||
■ WARN | ||||
Character string | := <Character string with length 0> | ■ | ERR | |
| ||||
|
|
| ||
| Projector control command. The format is shown below. | ■ OK | ||
Control | <Control command character string> | ■ BUSY | ||
■ WARN | ||||
command | := <Control name>□<Parameter value> | ■ | ERR | |
Character string | ||||
|
|
| ||
|
|
|
| |
| Command that sets values for each parameter. The format is | ■ | OK | |
| shown below. | |||
|
|
| ||
Setting | <Setting command character strings> | ■ BUSY | ||
■ | WARN | |||
command | ||||
Character string | := <Parameter name>△=△<Parameter value> | ■ ERR | ||
| For the definition of <Parameter value>, refer to "Parameter |
|
| |
| definitions. |
|
| |
| Requests current value of each parameter. The format is shown | □ | OK | |
| below. | |||
|
|
| ||
Reference | <Reference command character string> | ■ BUSY | ||
■ | WARN | |||
command | :=?△<Parameter name> GET□<Parameter name> | |||
|
| |||
Character string |
| ■ | ERR | |
|
| |||
Revision History / Date
Changes
Revised by
Approved by
- 4 -
