![This sets the vertical keystone to –23.](/images/new-backgrounds/119586/119586159x1.webp)
Projector WUX10 MarkII User Commands
VKS
Vertical keystone setting
Format
VKS=<Vertical keystone distortion value:Number>
GET□VKS / ?△VKS
Environment
| Power |
|
|
|
| Input | |||
OFF | ON | PM | COMP | VIDEO | HDMI | None | |||
X | O | X | - |
|
|
|
Response
"i:OK" is returned if the parameter was set properly.
For 'GET VKS' or '?VKS', current vertical keystone setting value is returned as 'g:VKS=<Vertical keystone distortion value:Number>'
For details on other responses, refer to the "Error List".
Description
(1)This sets the vertical keystones.
(2)This command is identical to pressing the “KEYSTONE” button on the remote control.
(3)The settable keystone range varies depending on the input signal, screen size, number of horizontal and vertical dots, and other factors.
If keystone values are outside the range, "e:0801 INVALID_VALUE" is returned.
(4)The GET command can be used to obtain the current vertical/horizontal keystone value. ("GET VKS")
Example
Setting | This sets the vertical keystone to | |
> | ||
< | i:OK |
|
Reference | This retrieves the vertical keystone. | |
> | GET VKS or ?VKS |
<
*Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
Changes
Revised by
Approved by
- 76 -