Canon Ftoneadj, Projector WUX10 MarkII User Commands, Format, Environment, Response, Example

Projector WUX10 MarkII User Commands

FTONEADJ

Flesh tone adjustment

Format

FTONEADJ=<Flesh tone adjustment parameter:ID>

GET□FTONEADJ / ?△FTONEADJ

<Memory color adjustment parameter:ID>

OFF	No adjustment
FTONE_L	Flesh tone adjustment - light
FTONE_M	Flesh tone adjustment - medium
FTONE_H	Flesh tone adjustment - heavy

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned when flesh tone has been adjusted successfully.

For 'GET FTONEADJ' or '?FTONEADJ', current flesh tone adjustment is returned as

'g:FTONEADJ=<Flesh tone adjustment parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1)This command is used by selecting "No adjustment", "Flesh tone adjustment - light" to "Flesh tone adjustment - heavy".

(2)This command functions in the same way as when "Image adjustment" - "Advanced adjustment" - "Flesh tone adjustment" are selected on the menu.

(3)This sets the currently selected input signal and image mode.

(4)The current flesh tone adjustment setting can be obtained using the GET command. ("GET FTONEADJ")

(5)With the WUX10, "Memory color adjustment" function is not available.

Example

Control

>FTONEADJ=FTONE_M This sets the tone adjustment to "Flesh tone adjustment - medium".

< i:OK

Reference	This retrieves the flesh tone adjustment level.
> GET FTONEADJ or ?FTONEADJ

<g:FTONEADJ=FTONE_M

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 34 -