Canon 6AXADJ, Projector WUX10 MarkII User Commands, Format, Environment, Response, Description

Projector WUX10 MarkII User Commands

6AXADJ

6-axis adjustment ON/OFF

Format

6AXADJ=<6-axis adjustment parameter:ID> GET□6AXADJ / ?△6AXADJ

<6-axis adjustment parameter:ID>

ON	This sets the 6-axis adjustment to ON.
OFF	This sets the 6-axis adjustment to OFF.

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET 6AXADJ' or '?6AXADJ', current 6-axis adjustment state is returned in

'g:6AXADJ=<6-axis adjustment parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1)This command is used to select ON or OFF for the 6-axis adjustment.

(2)This command functions in the same way as when "Image adjustments" - "Advanced adjustments" - "6-axis adjustment" are selected on the menu.

(3)In the case of "6-axis adjustment," set the hue and color saturation of each axis using the 6AXR to Y "6-axis correction R to Y hue/color saturation setting" commands.

(4)This sets the currently selected input signal and image mode.

(5)The current 6-axis adjustment setting can be obtained using the GET command. ("GET 6AXADJ"）

Example

Control

>	6AXADJ=ON	The 6-axis adjustment is set to ON.
<	i:OK

Reference

>GET 6AXADJ or ?6AXADJ The 6-axis adjustment ON or OFF setting is obtained.

< g:6AXADJ=ON

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 13 -