Canon Dpon, Projector WUX10 MarkII User Commands, Format, Environment, Response, Description

Projector WUX10 MarkII User Commands

DPON

Direct power-on setting

Format

DPON=<Direct power-on setting parameter:ID>

GET□DPON / ?△DPON

<Direct power-on setting parameter:ID>

ON	This sets direct power-on to ON.
OFF	This sets direct power-on to OFF.

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET DPON' or '?DPON', current direct power-on setting is returned as

'g:DPON=<Direct power-on setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1)This command is used to set direct power-on function to ON or OFF.

(2)This command functions in the same way as when "System setting" - "Direct power-on" are selected on the menu.

(3)Direct power-on cannot be set to ON when "OFF" has been selected as the power management setting (PMM=OFF).

("e:1004 POWER_MANAGEMENT_OFF" is returned.)

(4)The current direct power-on setting can be obtained using the GET command. ("GET DPON")

Example

Setting

>	DPON=ON	Direct power-on is set to ON.
<	i:OK

Reference

>GET DPON on ?DPON The current direct power-on setting is obtained.

< g:DPON=ON

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 29 -