Canon manual Ledilluminate, The LED display is set to ON, Projector WUX10 MarkII User Commands

Projector WUX10 MarkII User Commands

LEDILLUMINATE

Emotional LED lighting control

Format

LEDILLUMINATE=<LED lighting control setting parameter:ID>

GET□LEDILLUMINATE / ?△LEDILLUMINATE

<LED lighting control setting parameter:ID>

ON	This sets the LED display to ON.
OFF	This sets the LED display to OFF.

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET LEDILLUMINATE' or '?LEDILLUMINATE', current emotional LED lighting setting is returned as

'g:LEDILLUMINATE=<LED lighting control setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1)This command is used to control the lighting of the emotional LED.

(2)This command functions in the same way as when "System setting" - "LED illumination" are selected on the menu.

(3)The current LED illumination setting can be obtained using the GET command. ("GET LEDILLUMINATE")

Example

Setting		The LED display is set to ON.
> LEDILLUMINATE=ON
<	i:OK
Reference		The ON or OFF setting for the LED display is obtained.
>	GET LEDILLUMINATE or ?LEDILLUMINATE

<g:LEDILLUMINATE=ON

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 48 -