Canon Hpos/Vpos, This acquires the vertical position, Projector WUX10 MarkII User Commands

Projector WUX10 MarkII User Commands

HPOS/VPOS

Horizontal/Vertical position adjustment

Format

HPOS=<Horizontal position:Number>

VPOS=<Vertical position:Number>

GET□HPOS / ?△HPOS

GET□VPOS / ?△VPOS

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	X	O	O	X	X	X	X

Response

"i:OK" is returned if the parameter was set properly.

For 'GET HPOS' or '?HPOS' ('GET VPOS' or '?VPOS'), current horizontal (vertical) position is returned as

'g:HPOS=<Horizontal position:Number>' （'g:VPOS=<Vertical position:Number>'）

For details on other responses, refer to the "Error List".

Description

(1)This adjusts the horizontal and vertical position on the screen.

(2)This command functions in the same way as when "Display setting" - "Input signal settings" - "Horizontal position adjustment" or "Vertical position adjustment" are selected on the menu.

(3)If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned as an error response.

(4)If signals are not input, 'e:2010 NO_SIGNAL' is returned.

(5)Adjustment range is limited. If number is invalid, "e:0801 INVALID_VALUE" is returned.

(6)The GET command can be used to retrieve the current horizontal and vertical position. ("GET HPOS" "GET VPOS")

Example

Setting	This sets the horizontal position to 12.
>HPOS=12
<i:OK
Reference	This acquires the vertical position.
>GET VPOS or ?VPOS
<g:VPOS=8

* Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 38 -