USING YOUR RANGE
THE ELECTRONIC OVEN CONTROL
Electronic display
ON
Indicator lights
(see below)
BAKE
BROIL START ?
HEAT CLEAN
Auto clean pad |
| DOOR LOCKED |
|
| Start/enter | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| pad | ||
(p. 20) |
|
|
|
|
| START | OFF |
|
| |||||||
|
|
|
|
|
|
|
| |||||||||
|
| BAKE |
| CUSTOM | AUTO |
|
|
|
| |||||||
Bake pad |
|
| TEMP |
|
|
|
|
|
|
|
|
| ||||
| BROIL | CLEAN | ENTER | CANCEL |
| Off/cancel pad | ||||||||||
|
|
|
|
| ||||||||||||
(pp. 11, 13) |
|
|
|
|
|
|
|
| 5 SEC |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
| Custom broil |
|
|
|
|
|
|
|
|
| |||||
|
| Temperature pad |
|
|
|
|
| |||||||||
|
| pad |
| (pp. 11, 13, 15, 20) |
|
|
|
|
| |||||||
|
| (pp. 14, 15) |
|
|
|
|
|
|
|
|
|
|
|
Display
•When you first plug in the range, “PF” will appear on the display until you press any command pad. If “PF” again appears on the display, your electric- ity was off for a while.
•When you are using the oven, the display will show preheat times and temperature settings.
•When you are not using the oven, the display will be blank.
•When setting a function, if you do not press START/ENTER within 5 seconds, the Start? indicator light will flash. If you do not press START/ENTER within 5 minutes, the function will be canceled.
Indicator lights
An indicator light to the left of the display lights up when you are in a setting. An indicator light on the display lights up when the oven is on.
Using the control lock
The control lock lets you disable the control panel command pads. The control lock comes in handy when you want to prevent others from using the oven.
NOTES:
•You can only use the control lock when the oven is not in use or the control has not been set.
•Set the control lock when cleaning the control panel to prevent yourself from accidentally turning on the oven.
To lock the control panel:
Press and hold START/ENTER for 5 seconds. You will hear a single tone and “Loc” will appear on
START | the temperature display for 5 seconds. | ||
|
| “Loc” will then appear whenever a | |
|
|
| |
| ENTER | ||
| 5 SEC | command pad is pressed. | |
|
|
To unlock the control panel:
Press and hold START/ENTER for 5 seconds. You will hear a single tone, and “Loc” will
START disappear from the temperature display.
ENTER
5 SEC
STARTING/CANCELING A FUNCTION
After setting a function for the first time, you must press START/ENTER to start the
START function.
ENTER
5 SEC
OFF/CANCEL will cancel any function except for the control lock.
OFF
CANCEL
10