Whirlpool SF350BEG warranty Caring For Your Range, Lift-Up Cooktop And Surface Burners

CARING FOR YOUR RANGE

LIFT-UP COOKTOP AND SURFACE BURNERS

1.Remove the surface burner grates.

2.Lift the front of cooktop at both front corners un- til the support rods lock into place.

NOTE: Do not drop the cooktop. Damage could result to the porcelain and the cooktop frame.

3.Wipe the surface under the cooktop with warm, soapy water and a sponge. Use a soap- filled plastic scrubbing pad on heavily soiled

areas.

4.Wipe off the surface burners with warm, soapy water and a sponge after each use. To remove cooked-on food, soak the burners in a vinegar and water solu-

tion for 20-30 minutes. Then scrub them with a plastic scrubbing pad.

(See the “Cleaning chart” section for more information.)

5.Check the burner flames once in a while for proper size and shape as shown.

Ports	A good flame is blue in
	color. If flames lift away
1 "	from ports, are yellow,

2

or are noisy, turn off the burner. Allow the burner to cool and follow Step 6. If you still have a problem, contact an authorized ser- vice technician to check the air/gas mixture or see

the Installation Instructions.

6.If the ports are clogged, clean with a straight pin. DO NOT enlarge or distort the ports. DO NOT use a tooth-

pick to clean the ports. Toothpick pieces may clog the ports.

7.To lower the cooktop, lift the cooktop from both sides while pressing the support rods back to unlock them. Lower the

cooktop into place.

8.Replace the surface burner grates.

24