Canon Zstepdrv, Projector WUX10 MarkII User Commands, Format, Environment, Response, Example

Projector WUX10 MarkII User Commands

ZSTEPDRV

Zoom lens step drive control

Format

ZSTEPDRV=<Zoom lens step control parameter:ID>

<Zoom lens step control parameter:ID>

WIDE	This zooms to the wide-angle end.
TELE	This zooms to the telephoto end.

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned when zooming was completed successfully after step drive. For details on other responses, refer to the "Error List".

Description

(1)This command is used to drive the zoom lens.

(2)This command functions in the same way as when first the "ZOOM" button on the remote control or main unit panel is pressed and then the "←" or "→" button is pressed.

(3)The amount by which the lens is zoomed is constant, and it is fixed in the system.

(4)If a zooming error occurs, step drive cannot be controlled.

(5)There are no GET commands available for this command.

Example

Control	1-step control is exercised over the zoom toward the TELE end.
> ZSTEPDRV=TELE

<I:OK

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 80 -