Projector WUX10 MarkII User Commands
BLANKCOLOR
Screen when BLANK setting
Format
BLANKCOLOR=<Screen when BLANK setting parameter:ID>
GET□BLANKCOLOR / ?△BLANKCOLOR
<Screen when BLANK setting parameter:ID>
BLACK | Black screen |
BLUE | Blue screen |
Environment
| Power |
|
|
|
| Input | |||
OFF | ON | PM | COMP | VIDEO | HDMI | None | |||
X | O | X | - |
|
|
|
Response
"i:OK" is returned if the parameter was set properly.
For 'GET BLANKCOLOR' or '?BLANKCOLOR', current screen when BLANK setting is returned as
'g:BLANKCOLOR=<BLANK display screen setting parameter:ID>'
For details on other responses, refer to the "Error List".
Description
(1)This command is used to set the screen when BLANK.
(2)This command functions in the same way as when "Display settings" - "User screen setting" - "Screen when blank" are selected on the menu.
(3)The current screen when BLANK setting can be obtained using the GET command. ("GET BLANKCOLOR")
Example
Setting
> | BLANKCOLOR=BLACK | Set to "Black screen" when screen is BLANK. |
< | Ok |
|
Reference
>GET BLANKCOLOR or ?BLANKCOLOR Screen when BLANK setting is obtained.
< g:BLANKCOLOR=BLACK
*Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
Changes
Revised by
Approved by
- 22 -