Projector WUX10 MarkII User Commands
SIGNALSTATUS
Signal status inquiry
Format
GET□SIGNALSTATUS / ?△SIGNALSTATUS
Environment
| Power |
|
|
|
| Input | |||
OFF | ON | PM | COMP | VIDEO | HDMI | None | |||
X | O | X | - |
|
|
| |||
Response
Current image signal input status is returned as
'g:SIGNALSTATUS=<Signal status:ID>'
<Signal status:ID>
Signal status | Meaning |
|
|
NO_SIGNAL | Signal not detected |
|
|
DISPLAYING | Image now displayed or display enable status |
|
|
SETTING | Signal detection and display preparation in progress |
|
|
For details on other responses, refer to the "Error List".
Description
(1)This inquires about the current image signal input status.
(2)This returns the signal status of the selected input. Use INPUT command for the input selection.
(3)"e:1006:NOW_BLANK" is returned during blanking.
Example
>GET SIGNALSTATUS or ? SIGNALSTATUS < g:SIGNALSTATUS=NO_SIGNAL
*Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
Changes
Revised by
Approved by
- 72 -
