Canon Lamp, Projector WUX10 MarkII User Commands, Format, Environment, Response, Description

Projector WUX10 MarkII User Commands

LAMP

Lamp output setting

Format

LAMP=<Lamp output setting parameters:ID>

GET□LAMP / ?△LAMP

<Lamp output setting parameters:ID>

NORMAL	Normal
SILENT	Silent cooling

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET LAMP' or '?LAMP', current lamp output is returned as

'g:LAMP=<Lamp output setting parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1)This command is used to set the light quantity of the lamp to "NORMAL" or "SILENT" (reduced light quantity appropriate for silent cooling).

(2)This command functions in the same way as when "Image adjustment" - "Lamp mode setting" are selected on the menu.

(3)This sets the currently selected input signal and image mode.

(4)The current lamp output can be acquired using the applicable GET command. ("GET LAMP")

Example

Setting

>	LAMP=NORMAL	The lamp output is set to “NORMAL”.
<	i:OK

Reference

>GET LAMP or ?LAMP This retrieves the lamp output.

<g:LAMP=SILENT

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 45 -