Canon Gamma, This sets the gamma correction to, Projector WUX10 MarkII User Commands, Format

Projector WUX10 MarkII User Commands

GAMMA

Gamma adjustment

Format

GAMMA=<Gamma adjustment:Number>

GET□GAMMA / ?△GAMMA

Setting values for <Gamma adjustment: Number> are -10 to 10.

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET GAMMA' or '?GAMMA', current gamma adjustment is returned as 'g:GAMMA=<Gamma adjustment:Number>'

For details on other responses, refer to the "Error List".

Description

(1)This performs the Gamma adjustment.

(2)This command functions in the same way as when "Image adjustment" - "Gamma adjustment" are selected on the menu.

(3)If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(4)This sets the currently selected input signal and image mode.

(5)The current gamma adjustment can be acquired using the applicable GET command. ("GET GAMMA")

Example

Setting

>	GAMMA=-1	This sets the gamma correction to –1.
<	i:OK

Reference

>GET GAMMA or ?GAMMA This retrieves the gamma adjustment.

< g:GAMMA=3

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 35 -