Projector WUX10 MarkII User Commands
BLANK
BLANK function
Format
BLANK=<BLANK parameter:ID>
GET□BLANK / ?△BLANK
<BLANK parameter:ID> |
|
ON | BLANK ON |
OFF | BLANK OFF. |
Environment
| Power |
|
|
|
| Input | |||
OFF | ON | PM | COMP | VIDEO | HDMI | None | |||
X | O | X | - |
|
|
|
Response
"i:OK" is returned if the parameter was set properly.
For 'GET BLANK' or '?BLANK', current BLANK status is returned as
'g:BLANK=ON' 'g:BLANK=OFF'
For details on other responses, refer to the "Error List".
Description
(1)This command is used to set the BLANK function.
(2)This command is identical to pressing the “VOL+” and
(3)The current BLANK settings can be obtained using the GET command. ("GET BLANK")
Example
Setting |
|
> BLANK=ON | BLANK is set to ON. |
< i:OK |
|
Reference |
|
> GET BLANK or ?BLANK | The current BLANK status is referenced. |
<g:BLANK=ON
*Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
Changes
Revised by
Approved by
- 21 -