Canon WUX10 manual Communication System Serial, Communication System LAN

					Projector WUX10 MarkII User Commands
Communication System (Serial)
	Item				Specifications
	Communication system	RS-232-C Start-stop synchronization Semi-duplex communication
	Transmission speed	19.2 Kbps
	Character length		8 bits/character
	Stop bit	2 bits
	Parity		None
	Transmission format	Variable-length record with terminal as delimiter
	Maximum transmission		Maximum of 256 characters (bytes) including delimiters.
	length
			Delimiters are one of CR, LF, CR+LF, Null (0) (delimiters are identified
	Delimiters		automatically).
			Response delimiters are identical to command delimiters.
			ASCII code (General-purpose characters: 20h to 7Fh), Tab (09h)
			(Codes other than those above and delimiters are considered “other
	Transmission codes		separator codes”)
			Uppercase and lowercase of alphabetic characters are considered the same
			character.
			Double-byte characters and single-byte characters are not distinguished. All
			are considered single-byte characters.
	Communication		No procedure
	procedure
	Flow control	None
	Error control	None
	Break signal		Not supported
	Time out		Tc Character：		5s (Timeout between CR and LF is 10ms.)
			Tr	Command/response	15s
				interval:

Communication System (LAN)

Item Specifications

Communication system

Transmission speed

Character length

Revision History / Date

Changes

Revised by

Approved by

- 3 -