Canon Hpix/Vpix, Projector WUX10 MarkII User Commands, Format, Environment, Response, Example

Projector WUX10 MarkII User Commands

HPIX/VPIX

Horizontal/Vertical resolution adjustmen

Format

HPIX=<Horizontal resolution:Number>

VPIX=<Vertical resolution:Number>

GET□HPIX / ?△HPIX

GET□VPIX / ?△VPIX

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	O	O	O	X	X	X	X

Response

"i:OK" is returned if the parameter was set properly.

For 'GET HPIX' or '?HPIX' ('GET VPIX' or '?VPIX'), current horizontal (vertical) resolution is returned as 'g:HPIX=<Horizontal resolution:Number>'

（'g:VPIX=<Vertical resolution:Number>'）

For details on other responses, refer to the "Error List".

Description

(1)This adjusts the horizontal and vertical resolution (number of dots) on the screen.

(2)This command functions in the same way as when "Display setting" - "Input signal settings" - "Horizontal resolution adjustment" or "Vertical resolution adjustment" are selected on the menu.

(3)If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned as an error response.

(4)If signals are not input, 'e:2010 NO_SIGNAL' is returned.

(5)Adjustment range is limited. If number is invalid, "e:0801 INVALID_VALUE" is returned.

(6)The GET command can be used to retrieve the current horizontal and vertical position. ("GET HPIX" "GET VPIX")

Example

Setting

>	HPIX=1024	This sets the horizontal resolution to 1024.
<	i:OK

Reference

>GET VPIX or ?VPIX This retrieves the vertical resolution.

< g:VPIX= 864

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 37 -