Projector WUX10 MarkII User Commands
RGBGAIN
RGB gain adjustment
Format
RGBGAIN=<R gain setting:Number>▽<G gain setting:Number>▽<B gain setting:Number> GET□RGBGAIN / ?△RGBGAIN
Setting values for <R/G/B gain setting:Number> are
Environment
| Power |
|
|
|
| Input | |||
OFF | ON | PM | COMP | VIDEO | HDMI | None | |||
X | O | X | - |
|
|
|
Response
"i:OK" is returned if the parameter was set properly.
For 'GET RGBGAIN' or '?RGBGAIN', current RGB gain adjustment values are returned as 'g:RGBGAIN=<R gain setting:Number>,<G gain setting:Number>,<B gain setting:Number>'
For details on other responses, refer to the "Error List".
Description
(1)This command is used to adjust the gain of the R, G and B colors.
(2)This command functions in the same way as when "Image adjustment" - "Color adjustment" - "Gain adjustment" are selected on the menu.
(3)If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4)This sets the currently selected input signal and image mode.
(5)The current RGB gain values can be obtained using the GET command. ("GET RGBGAIN")
Example
Setting | 11, 12 | The R gain is set to 10, G gain to 11 and B gain to 12. | |
> RGBGAIN=10, | |||
< | i:OK |
|
|
Reference | or ?RGBGAIN | The RGB gain values are obtained. | |
> | GET RGBGAIN |
<
*Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
Changes
Revised by
Approved by
- 64 -