NETGEAR STM150EW-100NAS, UTM5EW-100NAS VPN client advanced authentication settings, 279, Nat-T

ProSecure Unified Threat Management (UTM) Appliance

c.Specify the settings that are explained in the following table.

Table 66. VPN client advanced authentication settings

Setting	Description
Advanced features
Aggressive Mode	Select this check box to enable aggressive mode as the mode of negotiation
	with the UTM.
NAT-T	Select Automatic from the drop-down list to enable the VPN client and UTM
	to negotiate NAT-T.
Local and Remote ID
Local ID	As the type of ID, select DNS from the Local ID drop-down list because you
	specified FQDN in the UTM configuration.
	As the value of the ID, enter utm_remote.com as the local ID for the VPN
	client.
	Note: The remote ID on the UTM is the local ID on the VPN client. It might
	be less confusing to configure an FQDN such as client.com as the remote ID
	on the UTM and then enter client.com as the local ID on the VPN client.
Remote ID	As the type of ID, select DNS from the Remote ID drop-down list because
	you specified an FQDN in the UTM configuration.
	As the value of the ID, enter utm_local.com as the remote ID for the UTM.
	Note: The local ID on the UTM is the remote ID on the VPN client. It might
	be less confusing to configure an FQDN such as router.com as the local ID
	on the UTM and then enter router.com as the remote ID on the VPN client.

8.Configure the global parameters:

a.Click Global Parameters in the left column of the Configuration Panel screen. The Global Parameters pane displays in the Configuration Panel screen.

Virtual Private Networking Using IPSec, PPTP, or L2TP Connections

279