NETGEAR STM150EW-100NAS manual Setup Wizard of 10 Services, For Daylight Savings Time check box

ProSecure Unified Threat Management (UTM) Appliance

Enter the settings as explained in the following table, and then click Next to go the following screen.

Table 6. Setup Wizard Step 3: System Date and Time screen settings

Setting	Description
Set Time, Date, and NTP Servers
Date/Time	From the drop-down list, select the local time zone in which the UTM operates. The
	correct time zone is required in order for scheduling to work correctly. The UTM
	includes a real-time clock (RTC), which it uses for scheduling.
Automatically Adjust for	If daylight savings time is supported in your region, select the Automatically Adjust
Daylight Savings Time	for Daylight Savings Time check box.
NTP Server (default or	From the drop-down list, select an NTP server:
custom)	• Use Default NTP Servers. The UTM’s RTC is updated regularly by contacting a
	default NETGEAR NTP server on the Internet.
	• Use Custom NTP Servers. The UTM’s RTC is updated regularly by contacting
	one of the two NTP servers (primary and backup), both of which you need to
	specify in the fields that become available with this selection.
	Note: If you select this option but leave either the Server 1 or Server 2 field blank, both
	fields are set to the default NETGEAR NTP servers.
	Note: A list of public NTP servers is available at
	http://support.ntp.org/bin/view/Servers/WebHome.
	Server 1 Name / IP	Enter the IP address or host name of the primary NTP server.
	Address
	Server 2 Name / IP	Enter the IP address or host name of the backup NTP server.
	Address

After you have completed the steps in the Setup Wizard, you can change the date and time by selecting Administration > System Date & Time. For more information about these settings, see Configure Date and Time Service on page 456.

Setup Wizard Step 4 of 10: Services

Figure 29.

Use the Setup Wizard to Provision the UTM in Your Network

55