NETGEAR UTM5EW-100NAS manual 496, Settings, MAC Address and Configure, Advanced WAN Options on

ProSecure Unified Threat Management (UTM) Appliance

Table 127. Detailed Status screen fields (continued)

Item	Description
Firmware Version (UTM9S	The firmware on the xDSL network module.
and UTM25S only)
WAN State	The WAN state can be either UP or DOWN, depending on whether the port is
	connected to the Internet and whether the port is enabled. For information about
	connecting WAN ports, see Chapter 3, Manually Configure Internet and WAN
	Settings.
NAT	The NAT state can be either Enabled or Disabled, depending on whether NAT is
	enabled (see Configure Network Address Translation (All Models) on page 81) or
	classical routing is enabled (see Configure Classical Routing (All Models) on
	page 82).
Connection Type	The connection type can be Static IP, DHCP, PPPoE, or PPTP, depending on
	whether the WAN address is obtained dynamically through a DHCP server or
	assigned statically by you. For information about connection types, see Manually
	Configure the Internet Connection on page 75.
Connection State	The connection state can be either Connected or Not Connected, depending on
	whether the WAN port is physically connected to a modem or router. For
	information about connecting a WAN port, see the ProSecure Unified Threat
	Management UTM Installation Guide.
WAN Connection Type	The detected type of Internet connection that is used on this port. The WAN
	connection type can be DSL, ADSL, CableModem, T1, or T3.
Upload Connection Speed	For the WAN port, this field displays the
	maximum upload speed that you have
	configured on the Advanced Options screen.
	By default, the speed is 1,000,000 Kbps.	For information about configuring
	For the xDSL and USB ports, this field
		the upload and download speeds for
	displays the detected upload speed.	WAN interfaces, see Set the UTM’s
Download Connection	For the WAN port, this field displays the	MAC Address and Configure
		Advanced WAN Options on
Speed	maximum download speed that you have
		page 94.
	configured on the Advanced Options screen.
	By default, the speed is 1,000,000 Kbps.
	For the xDSL and USB ports, this field
	displays the detected download speed.
IP Address	The IP address of the WAN port.
		These settings are either obtained
Subnet Mask	The subnet mask of the WAN port.
		dynamically from your ISP or
Gateway	The IP address of the gateway.	specified by you on the WAN ISP
		Settings screen for this port (see
Primary DNS Server	The IP address of the primary DNS server.	Manually Configure the Internet
		Connection on page 75).
Secondary DNS Server	The IP address of the secondary DNS
	server.

Monitor System Access and Performance

496