NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual 113

ProSecure Unified Threat Management (UTM) Appliance

Figure 59.

The Known PCs and Devices table lists the entries in the network database. For each computer or device, the following fields display:

•Check box. Allows you to select the computer or device in the table.

•Name. The name of the computer or device. For computers that do not support the NetBIOS protocol, the name is displayed as Unknown (you can edit the entry manually to add a meaningful name). If the computer or device was assigned an IP address by the DHCP server, then the name is appended by an asterisk.

•IP Address. The current IP address of the computer or device. For DHCP clients of the UTM, this IP address does not change. If a computer or device is assigned a static IP address, you need to update this entry manually after the IP address on the computer or device has changed.

•MAC Address. The MAC address of the computer or device’s network interface.

•Group. Each computer or device can be assigned to a single LAN group. By default, a computer or device is assigned to Group 1. You can select a different LAN group from the Group drop-down list in the Add Known PCs and Devices section or on the Edit Groups and Hosts screen.

•Profile Name. The VLAN to which the computer or device is assigned.

•Action. The Edit table button, which provides access to the Edit Groups and Hosts screen.

LAN Configuration

113