NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Order of Precedence for Rules, 138

ProSecure Unified Threat Management (UTM) Appliance

Table 28. Inbound rules overview (continued)

Setting	Description	Inbound Rules
Application Control	Select an application control profile to allow, block, or log traffic for	LAN WAN rules
	entire categories of applications, for individual applications, or for a	DMZ WAN rules
	combination of both. The application control profile applies only to
	traffic that is covered by this rule. To create an application control
	profile, select + Create New from the Application Control drop-down
	list. The Add or Edit Application Control Profile pop-up screen
	displays. For information about creating and enabling application
	control profiles, see Configure Application Control on page 240.
	Note: You cannot assign application control profiles to LAN DMZ
	firewall rules.

Note: Some residential broadband ISP accounts do not allow you to run any server processes (such as a web or FTP server) from your location. Your ISP might periodically check for servers and might suspend your account if it discovers any active servers at your location. If you are unsure, see the acceptable use policy of your ISP.

Order of Precedence for Rules

As you define a new rule, it is added to a table in a Rules screen as the last item in the list, as shown in the LAN WAN Rules screen example in the following figure:

Figure 66.

Firewall Protection

138